Planet Networking & Communication IGS-10020HPT User Manual page 353

Please press the Add New Rule button to start setting PoE Schedule function. You have to set PoE schedule to profile and then
go back to PoE Port Configuration, and select "Schedule" mode from per port "PoE Mode" option. You can then indicate which
schedule profile could be applied to the PoE port.
The page includes the following fields:
Object
• Profile
• Week Day
• Start Hour
• Start Min
• End Hour
• End Min
• Reboot Enable
Figure 4-6-1-6: PoE Schedule Screenshot
Description
Set the schedule profile mode. Possible profiles are:
Profile1
Profile2
Profile3
Profile4
Allows user to set week day for defining PoE function should be enabled on the day.
Allows user to set what hour does PoE function enables.
Allows user to set what minute does PoE function enables.
Allows user to set what hour does PoE function disables.
Allows user to set what minute does PoE function disables.
Allows user to enable or disable whole PoE port reboot by PoE reboot schedule.
353
User's Manual of IGS PoE series