Planet Networking & Communication IGS-10020HPT User Manual page 324

• Ethernet

IP Parameters
The IP parameters can be configured when Frame Type "IPv4" is selected.
Object
•
IP Protocol Filter
• IP Protocol Value
• IP TTL
• IP Fragment
Specify whether frames can hit the action according to their ARP/RARP protocol
address space (PRO) settings.
0: ARP/RARP frames where the PRO is equal to IP (0x800).
■
1: ARP/RARP frames where the PRO is equal to IP (0x800).
■
Any: Any value is allowed ("don't-care").
■
Description
Specify the IP protocol filter for this ACE.
Any: No IP protocol filter is specified ("don't-care").
■
Specific: If you want to filter a specific IP protocol filter with this ACE,
■
choose this value. A field for entering an IP protocol filter appears.
ICMP: Select ICMP to filter IPv4 ICMP protocol frames. Extra fields for
■
defining ICMP parameters will appear. These fields are explained later in
this help file.
UDP: Select UDP to filter IPv4 UDP protocol frames. Extra fields for
■
defining UDP parameters will appear. These fields are explained later in
this help file.
TCP: Select TCP to filter IPv4 TCP protocol frames. Extra fields for defining
■
TCP parameters will appear. These fields are explained later in this help
file.
When "Specific" is selected for the IP protocol value, you can enter a specific
value. The allowed range is 0 to 255. A frame that hits this ACE matches this IP
protocol value.
Specify the Time-to-Live settings for this ACE.
zero: IPv4 frames with a Time-to-Live field greater than zero must not be
■
able to match this entry.
non-zero: IPv4 frames with a Time-to-Live field greater than zero must be
■
able to match this entry.
Any: Any value is allowed ("don't-care").
■
Specify the fragment offset settings for this ACE. This involves the settings for
the More Fragments (MF) bit and the Fragment Offset (FRAG OFFSET) field for
an IPv4 frame.
No: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
■
greater than zero must not be able to match this entry.
Yes: IPv4 frames where the MF bit is set or the FRAG OFFSET field is
■
greater than zero must be able to match this entry.
Any: Any value is allowed ("don't-care").
■
324
User's Manual of IGS PoE series