Planet Networking & Communication IGS-10020HPT User Manual page 45

MGB-TLA10(V2)
YES
MGB-TLB10(V2)
MGB-TLA20
YES
MGB-TLB20
MGB-TLA40
YES
MGB-TLB40
MGB-TLA80
YES
MGB-TLB80
1.
2.
Connect the fiber cable
1. Attach the duplex LC connector on the network cable to the SFP transceiver.
2. Connect the other end of the cable to a device – switches with SFP installed, fiber NIC on a workstation or a media
converter.
3. Check the LNK/ACT LED of the SFP slot on the front of the Industrial Managed PoE+ Switch. Ensure that the SFP
transceiver is operating correctly.
1000 WDM(LC)
1000 WDM(LC)
1000 WDM(LC)
1000 WDM(LC)
1000 WDM(LC)
1000 WDM(LC)
1000 WDM(LC)
1000 WDM(LC)
It is recommended to use PLANET SFP on the Industrial Managed PoE+ Switch. If you
insert an SFP/SFP+ transceiver that is not supported, the Industrial Managed PoE+ Switch
will not recognize it.
Please choose the SFP/SFP+ transceiver which can be operated under -40~75 degrees C
temperature if the switch device is working in a 0~50 degrees C temperature environment.
Single Mode 10km
Single Mode 10km
Single Mode 20km
Single Mode 20km
Single Mode 40km
Single Mode 40km
Single Mode 80km
Single Mode 80km
45
User's Manual of IGS PoE series
1310nm 1550nm
1550nm 1310nm
1310nm 1550nm
1550nm 1310nm
1310nm 1550nm
1550nm 1310nm
1490nm 1550nm
1550nm 1490nm
-40 ~ 75 ℃
-40 ~ 75 ℃
-40 ~ 75 ℃
-40 ~ 75 ℃
-40 ~ 75 ℃
-40 ~ 75 ℃
-40 ~ 75 ℃
-40 ~ 75 ℃