Planet Networking & Communication IGS-10020HPT User Manual page 28

■ Reset Button
On the upper left side of the front panel, the reset button is designed for rebooting the Industrial Managed PoE+ Switch
without turning off and on the power. The following is the summary table of reset button
IGS-10020PT/IGS-10020HPT
Figure 2-4:
IGS-10020PT/10020HPT Reset Button
and Released
< 5 sec: System Reboot
> 5 sec: Factory Default
Reset Button Pressed
Function
Reboot the Industrial Managed PoE+ Switch.
Reset the Industrial Managed PoE+ Switch to Factory Default
configuration. The Industrial Managed PoE+ Switch will then
reboot and load the default settings as shown below:
。
。
。
。
。
User's Manual of IGS PoE series
IGS-20160HPT Reset Button
Default Username: admin
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
28
functions:
IGS-20160HPT
Figure 2-5: