Port Sequential - Planet Networking & Communication IGS-10020HPT User Manual

• Current Ports in Use
• Class 1 ~ 4 ports
• Power Consumption
• PoE Temperature
• Current Power
Consumption
• Total Power Reserved
• Temperature
•
Local Port
•
PD Class
•
Power Used [W]
•
Current Used [mA]
• Priority
• Port Status
• Power Inline Mode
• Total
Buttons
Auto-refresh : Check this box to enable an automatic refresh of the page at regular intervals.
: Click to refresh the page immediately.

4.6.1.6 Port Sequential

This page allows the user to configure the PoE Ports started up interval time. The PoE Port will start up one by one as
4-6-1-5 shows.
Displays the current PoE ports in use.
Displays the current ports of PoE class 1 ~ 4.
Displays the current power consumption (total watts and percentage)
Displays the current operating temperature of the first PoE chip unit.
Shows the total watts usage of Managed PoE Switch.
Shows how much the total power is reserved for all PDs.
Displays the current operating temperature of the PoE chip unit.
This is the logical port number for this row.
Displays the class of the PD attached to the port, as established by the classification
process. Class 0 is the default for PDs. The PD is powered based on PoE Class
level if system is working in Classification mode. A PD will return Class to 0 to 4 in
accordance with the maximum power draw as specified by
The Power Used shows how much power the PD currently is using.
The Power Used shows how much current the PD currently is using.
The Priority shows the port's priority configured by the user.
The Port Status shows the port's status.
Displays per PoE port operating in mid-span, end-span or UPoE mode.
Shows the total power and current usage of all PDs.
350
User's Manual of IGS PoE series
Table 4-6-1-1.
Figure