Planet Networking & Communication IGS-10020HPT User Manual page 285

Command Authorization Method Configuration
The command authorization section allows you to limit the CLI commands available to a user.
The table has one row for each client type and a number of columns, which are:
Object
• Client
• Methods
• Cmd Lvl
• Cfg Cmd
Accounting Method Configuration
The accounting section allows you to configure command and exec (login) accounting.
The table has one row for each client type and a number of columns, which are:
Object
• Client
• Methods
• Cmd Lvl
•
tacacs: Use remote
Description
The management client for which the configuration below applies.
Method can be set to one of the following values:
•
no: Command authorization is disabled. User is granted access to CLI
commands according to his privilege level.
•
tacacs: Use remote
all remote servers are offline, the user is granted access to CLI
commands according to his privilege leve
Authorize all commands with a privilege level higher than or equal to this level.
Valid values are in the range 0 to 15.
Also authorize configuration commands
Description
The management client for which the configuration below applies.
Method can be set to one of the following values:
•
no: Accounting is disabled.
•
tacacs: Use remote
Enable accounting of all commands with a privilege level higher than or equal to
this level.
Valid values are in the range 0 to 15. Leave the field empty to disable command
285
User's Manual of IGS PoE series
TACACS+ server(s) for authentication..
TACACS+ server(s) for command authorization. If
TACACS+ server(s) for accounting.