Planet Networking & Communication IGS-10020HPT User Manual page 268

• Any
• EtherType
• LLC
• SNAP
• IPv4
• IPv6
3.
LLC
4.
SNAP
5.
IPv4
6.
IPv6
Note: all frame types are explained below.
Allow all types of frames.
Ethernet Type Valid Ethernet type can have value within 0x600-0xFFFF or 'Any'
but excluding 0x800(IPv4) and 0x86DD(IPv6), default value is 'Any'.
SSAP Address Valid SSAP(Source Service Access Point) can vary from
■
0x00 to 0xFF or 'Any', the default value is 'Any'
DSAP Address Valid DSAP(Destination Service Access Point) can vary
■
from 0x00 to 0xFF or 'Any', the default value is 'Any'
Control Address Valid Control Address can vary from 0x00 to 0xFF or
■
'Any', the default value is 'Any'
PID Valid PID(a.k.a Ethernet type) can have value within 0x00-0xFFFF or 'Any',
default value is 'Any'
Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
■
Source IP Specific Source IP address in value/mask format or 'Any'. IP
■
and Mask are in the format x.y.z.w where x, y, z, and w are decimal
numbers between 0 and 255. When Mask is converted to a 32-bit binary
string and read from left to right, all bits following the first zero must also be
zero
DSCP Diffserv Code Point value(DSCP): It can be specific value, range of
value or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7,
EF or AF11-AF43
IP Fragment IPv4 frame fragmented option: yes|no|any
■
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range
■
applicable for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
■
applicable for IP protocol UDP/TCP
Protocol IP protocol number: (0-255, TCP or UDP) or 'Any'
Source IP IPv6 source address: (a.b.c.d) or 'Any', 32 LS bits
DSCP Diffserv Code Point value(DSCP): It can be specific value, range of value
or 'Any'. DSCP values are in the range 0-63 including BE, CS1-CS7, EF or
AF11-AF43
Sport Source TCP/UDP port:(0-65535) or 'Any', specific or port range applicable
for IP protocol UDP/TCP
Dport Destination TCP/UDP port:(0-65535) or 'Any', specific or port range
applicable for IP protocol UDP/TCP
268
User's Manual of IGS PoE series