Suzuki VLR1800 Service Manual page 285

Crankcase Breather Cover
• Apply bond to the mating surface of the breather
cover.
NOTE
• Make surfaces free from moisture, oil, dust
and other foreign materials.
• Spread on surfaces thinly to form an even
layer, and assemble the breather cover
within few minutes.
• Apply to distorted surfaces as it forms a
comparatively thick film.
: Sealant 99000–31140 (SUZUKI BOND
No.1207B or equivalent)
• Tighten the breather cover bolts.
NOTE
Fit the clamp "A" to the bolts.
"A"
Water Pump
• Apply grease to the O-ring.
CAUTION
!
Use a new O-ring to prevent oil leakage.
NOTE
When install the water pump, fit the convex
part "A" of the oil pump shaft onto the
concave part "B" of the water pump shaft.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
• Tighten the water pump mounting bolts.
I822H1140358-02
• Apply engine coolant to the O-ring.
NOTE
Use a new O-ring to prevent engine coolant
leakage.
I822H1140236-01
Engine Mechanical:
"A"
"B"
I822H1140237-01
I822H1140238-01
I822H1140239-01
1D-74