Indicate Color; 5-10.Comparison Functions - Unipulse F377A Operation Manual

- HOLD
At hold-off time, the held value is automatically printed to the UNIPULSE printer coupled with the
F377A through the SI/F. At hold-off time, hold values and real time values are output in the
GROSS area and NET area, respectively. Others are the same as in the setting of "OFF".
Setting range: OFF, MD, HOLD
How to set
SET.
→
5-9.

Indicate Color

The indicated value display color can be changed. By setting Comp.(Comparison Result), the
indicated value display color changes following the comparison status.
OK
HI, LO
HH, LL
Setting range: Yellow, Green, Blue, Comp.
How to set
SET.
→
5-10.
Comparison Functions
By the comparison function, the HI limit and LO limit values are set, and when the indicated value
exceeds the HI limit, the HI output is turned on, and when the indicated value falls below the LO
limit, the LO output is turned on. Also, HH limit and LL limit values may be set outside the HI-LO
limit comparison. When the indicated value exceeds the HH limit, the HH output is turned on, and
when the indicated value falls below the LL limit, the LL output is turned on. When the HI, HH, LO
and LL outputs are all off, the OK output is turned on.
〈HI/LO output conditions〉
〈HH/LL output conditions〉
〈OK output conditions〉
Indicated value
HH Limit
HI Limit
LO Limit
LL Limit
HI
LO
HH
LL
OK
System Setting Operation
→
green
yellow
red
System Setting Operation
→
HI:
LO:
HH:
LL:
OK:
OFF
ON
OFF
ON
OFF
ON
OFF
ON
OFF
ON
5 SETTING OF FUNCTIONS
Page 1
→
Page 2
→
Indicated value＞HI limit value
Indicated value ＜LO limit value
Indicated value＞HH limit value
Indicated value＜LL limit value
All conditions of HH, HI, LO and LL are off.
Time
Chapter
5
41