Hold End Timing; Hold Operations - Unipulse F377A Operation Manual

1-6.

Hold End Timing

The HOLD END (H/E) signal timing when Inflection Point, Relative Maximum, Relative
Minimum or Relative Difference hold is used can be changed.
Hold Sct / Detect Sct
How to set
SET.
→
- Hold Sct:
- Detect Sct:

■Hold operations

Initial value: Detect Sct
Exp. Setting Exp. Hold Set.
→
HOLD END (H/E) is on according to timing in which the SECTION signal is
off.
HOLD END (H/E) is on immediately after the detection of the hold point.
1 EXP. HOLD FUNCTIONS
Page 2
→
Chapter
1
115