Comparison Output Selection - Unipulse F377A Operation Manual

5 SETTING OF FUNCTIONS

■Comparison output selection

The number of HI-LO limits can be changed.
Correspondence between comparison screens and external I/O output terminals.
Chapter
How to set
5
SET.
44
Mode HI limit operation LO limit operation
H4 / L0 HI-1 to HI-4 None
H3 / L1 HI-1 to HI-3 LO
H2 / L2 HH, HI LO, LL
H1 / L3 HI LO-1 to LO-3
H0 / L4 None LO-1 to LO-4
The HI limit output is turned on when the indicated value becomes larger than the set value.
The LO limit output is turned on when the indicated value becomes smaller than the set value.
Work Setting
→
[HI-0, LO-4]
[HI-1, LO-3]
[HI-2, LO-2]
[HI-3, LO-1]
[HI-4, LO-0]
A2
H4 / L0 HI-4
H3 / L1 HI-3
H2 / L2 HH
H1 / L3 HI
H0 / L4 LO-1
Comp. Setting
→ →
[Setting]
A3 A4 A5
HI-3 OK HI-2
HI-2 OK HI-1
HI OK LO
LO-1 OK LO-2
LO-2 OK LO-3
Page 2
[Comparison]
A6
HI-1
LO
LL
LO-3
LO-4