Transmission Oil And Filter Check And Replacement; Transmission Oil Check; Transmission Oil Change - Zetor UTILIX CL Operator's Manual

Transmission Oil and Filter Check and Replacement

Transmission Oil Check

Check the level using the dipstick at the top of the transaxle.
If the level is low, add more oil through the filler.
Caution: Always ensure that you use the correct oil for topping up or oil changes.
1 - Maximum Level
2 - Minimum Level
1 - Oil dipstick
2 - Filler

Transmission Oil Change

Remove the drain plug from the bottom of the
transmission and drain the oil.
After draining the oil, screw the drain plug back on.
Pour the prescribed transmission oil to the required level
through the filling port.
1. Drain Plug
When changing the oil, always replace the filter as well.
Always use the prescribed oil, as using different types of oils or oils with different specifications can
cause damage.
Only add the prescribed amount of oil.
At the end of its service life, dispose of the oil in accordance with applicable regulations.
88
MAINTENANCE
U18N061
UCL18N057
UCL18N064