Removal of the knob
1. Turn the knob to the ''off'' position; the knob cannot be removed in this position.
2. Press the knob in and continue to turn it counter-clockwise as far as it will go.
3. Remove the knob.
1 - Knob
Refitting the knob
1. Refit the knob
2. Press and turn the knob clockwise, positioning it at 45°
Electric Lines Check
Loose wire terminals can cause contact break and damaged wires can lead to poor electrical operation, short
circuits and fire. Replace or repair worn and damaged wires.
If the insulation of any conductor is damaged, wrap this conductor with insulating plastic tape or replace it.
If the conductor clips or straps are damaged, secure the wires with new clips or straps.
Have the lines checked regularly once a year by an authorized service center to prevent fire.
MAINTENANCE
HODP138
99