Transmission Filter Maintenance; Front Axle Oil Check And Change; Check - Zetor UTILIX CL Operator's Manual

MAINTENANCE

Transmission Filter Maintenance

Remove the filter with a filter wrench.
To replace, apply oil or grease on the seal, fit by hand until seal contacts bare, then turn it 2/3rd turn further
to tighten it check for leaks.
1. Hydraulic oil filter
2. Hydraulic control valve
UCL18N069

Front Axle Oil Check and Change

Check

Remove the dipstick, wipe its end and insert it back. Then
pull it out and check that the oil level is between the upper
and lower mark.
In case of lack of oil, top up with the prescribed oil.
1 - Maximum
2 - Minimum
U18N078
89