Start With The Other Vehicle; Battery Disconnector - Zetor UTILIX CL Operator's Manual

Start with the Other Vehicle

1. Switch off all electrical appliances.
2. Use a connecting cable to connect the positive
terminals of battery of vehicles.
3. Use a connecting cable to connect the negative
terminal of a standard battery to the tractor engine case
with the discharged battery.
4. First start the engine of the vehicle with the charged
battery. Then start the tractor engine with the discharged
battery.
5. When the engine is started, disconnect the negative
cable first. Then disconnect the positive cable.
6. After starting the engine, charge the discharged battery
for about 30 minutes.

Battery Disconnector

The function of the battery disconnection switch is to disconnect the supply voltage from the electrical system
by interrupting the connection to the battery. The main benefits of this solution are:
1. Short circuit protection of the electrical system;
2. Reduction of the battery spontaneous discharge, especially when the machine is shutdown for a long
time;
3. Maintenance and repair work in safe conditions.
1 - Knob
Turn the knob to ''OFF'' to disconnect the battery and back to ''ON'' to resume normal operation. The battery
disconnect knob 1 is located on a bracket to the right of the battery. Putting the battery disconnect in safety
condition The battery disconnect knob may be removed for safety purposes in the manner described below.
98
MAINTENANCE
HODP136
HODP137