General Informations; General Safety Information; Decals Mounting Location - Zetor UTILIX CL Operator's Manual

Hide thumbs Also See for UTILIX CL:
Table of Contents

Advertisement

General safety information

IMPORTANT: This ''General safety Information'' should be kept with the machine at all times as reference
data.
This symbol means ATTENTION! YOUR SAFETY IS INVOLVED. The message that follows the
symbol contains important information about safety. Follow recommended precautions and safe
operation practice.

Decals mounting location

1 - Warning:
Always use the parking brake when parking.
Failure to do so may result in accidents and damage.
2 - Warning:
Only start the engine from the operator's seat. If the safety start switch is disabled, the engine can
start with a gear shifted.
Do not connect the clamp to the starter solenoid.
Connect the booster cables as shown on the battery plate and in the Operator´s manual.
Starting with gear engaged can cause the vehicle to move and may cause serious injury.
3 - Warning:
Do not adjust the steering wheel tilt when driving.
4 - Warning:
Do not use the hand throttle lever except for field work.
5 - Warning:
The brake pedals must always be locked together when driving on the road.
This ensures even braking and maximum efficiency of stopping. Sharp turns must be performed only at
moderate speeds.
6. Operation:
Particulate filter regeneration

GENERAL INFORMATIONS

UCLS5N001
33

Advertisement

Table of Contents
loading

Table of Contents