Clutch Cut-Off Arm; Brake Pedals - Zetor UTILIX CL Operator's Manual

Clutch cut-off arm

For long term storage of the tractor it is possible to latch the clutch in the disengaged position. Push the
clutch down and engage the latch to hold it there.
Warning: Do not attempt to start engine when this arm is being used.
1 - Clutch pedal
2 - Clutch pedal

Brake Pedals

The brake is used to force the vehicle to stop. This vehicle is equipped with separate brakes for its left and
right side. The right and left brake pedals are designed to assist in turning the tractor in terrain and on
unpaved surfaces.
A connecting latch is used to connect the left and right brake pedals.
When the brake pedals are disconnected, the warning light is on. When the brake pedals are connected, the
warning light is off.
Driving on the road - Always connect both brake pedals,
the brakes are applied simultaneously, the one-side brake
indicator light is off.
Working in the field - Disconnect the brake pedals, only
one side of the tractor is braking, the one-side brake
indicator light is on.
A connecting latch is available to connect the left and right brake pedals when driving at high

speed or on the road.
For safety reasons, always use it on the road or when driving at high speed, as braking on only

one side can result in machine damage, serious accidents and serious injury or death.
During tractor maintenance, make sure that the setting on both sides is the same.

TRACTOR CONTROLS
UCL18N022
CCL25045
49