Controlling Front Three-Point Hitch; Hydraulic Lock Of The Front Three-Point Hitch - Zetor UTILIX CL Operator's Manual

Controlling front three-point hitch

The hitch is equipped with two hydraulic cylinders.
Lifting and lowering is performed by the joystick lever
located on the right side of the driver's seat.
1 - Lifting of Front Three-Point Hitch Arms
2 - Lowering of Front Three-Point Hitch Arms
3, 4 - Oil pressure release to the quick couplers of the
SCV located on the front three-point hitch
5 - Joystick lever is locked
6 - Joystick lever is unlocked
The button on the joystick head is not functional in this
case.
After lowering or lifting the front three-point hitch arms to the required position, lock the
joystick lever with the lock (5) to prevent it from moving when accidentally leaning against the
joystick lever.

Hydraulic lock of the front three-point hitch

Hydraulic locking of the front three-point hitch is performed in any position of the hydraulic cylinders by two
valves located on the right side of the tractor under the cab, in the area of the right footrest (A).
To close the valves (lock the movement of the arms), move the lever to the position shown in figure (B).
To open the valves (unlock the movement of the arms), move the lever to the position shown in figure (C).
The locking or unlocking of the arm movement must always be performed on both valves. It is
forbidden to have one valve open and the other closed during the operation of the tractor.
If the front three-point hitch is not used, both valves must be closed.
When transporting mounted implements, always lock the hitch in the raised position
hydraulically, with valves located on the right side of the tractor under the cab.
This hydraulic lock is recommended even if no equipment is connected to the three-point hitch.
70
TRACTOR CONTROLS
UCL18NN004
UCL18N036