Engine Oil Change; Engine Oil Filter Replacement - Zetor UTILIX CL Operator's Manual

Engine Oil Change

Park tractor on level surface, shutoff engine. Remove sump plug & drain oil.
Replace and check the sump plug and refill the engine with oil to the correct level on the dipstick.
When changing the oil, always replace the filter as well.
Always use the prescribed oil, as using different types of oils or oils with different specifications can
cause damage.
Do not overfill the crankcase with oil.

Engine Oil Filter Replacement

1 - Engine Oil Filter
2 - Engine Oil Dipstick
Using the oil filter wrench, screw the filter anticlockwise to
remove it. Lightly lubricate the rubber seal ring on the new
filter with oil, rotate clockwise until the seal reaches the
sealing surface, and then rotate another 2/3 turn to tighten
it properly.
MAINTENANCE
UCLS5N014
UCL18N067
87