Replacement Of The Transmission Oil Cleaner Element With Hydraulic Pump Suction Filter; Gear System Drain Plug; Oil Replacement In Gear System - Zetor MAJOR HS Series Operator's Manual

MAINTENANCE INSTRUCTIONS

Replacement of the transmission oil cleaner element with hydraulic pump suction filter

MHS16N043
The oil filter is located on the left side of the gearbox.
Prior to the replacement of the filter element put a suitable vessel for catching the dripping oil
under the tractor.
1. Unscrew the oil filter body (1)
2. Replace the filter element
3. Perform the reassembly of the oil filter body
Note: Prior to reassembly of the filter body lubricate the sealing o-ring with lubricating oil.

Gear system drain plug

Gear system drain plug is placed on the box of front axle
drive.
NM13N068

Oil replacement in gear system

1. Unscrew the drain plug (1), preferably when the driving
is finished or when the oil is heated to the operating
temperature
2. Drain oil (take out the dipstick (2) to facilitate drainage)
3. Clean the drain plug (1) and screw it back
4. Replace the filter elements (3, 4)
5. Add new oil through the dipstick hole (2)
6. Start the engine and leave it running for ca. 3 minutes
at idling speed.
7. When the engine is stopped and the surface is calm,
check the amount of oil with the dipstick (2)
MHS16N044
118