Reverse Shift Lever - Zetor UTILIX CL Operator's Manual

Reverse Shift Lever

This control allows you to change the direction of travel from front to reverse and from reverse to front. When
not in motion, move the lever to the 'N' position for neutral.
Push the lever away from the driver to drive forward.

Pull the lever towards the driver to reverse.

1. Reverse Shift Lever
Depress the clutch pedal fully before moving the reverse shift lever.
When changing the direction from front to reverse or reverse to front, make sure that the tractor is
stopped before changing the direction. Failure to do so may result in damage to the machine or
serious injury.
Warning:
Only use the reverse shift lever when sitting in the tractor.

Do not use the reverse lever to start the tractor when towing or driving uphill, use the clutch

instead.
Always stop before getting off the tractor.

If the parking brake is applied during the starting off, it is signaled by an audible warning
signal.
If the parking brake is applied during driving, the brakes will be damaged.
TRACTOR CONTROLS
HODP061
53