Antifreeze; Check Of Radiators For Clogging; Engine Oil And Filter Replacement; Engine Oil Check - Zetor UTILIX CL Operator's Manual

MAINTENANCE

Antifreeze

Frozen coolant can damage the engine.
Flush the radiator before changing the antifreeze.
Mix the antifreeze solution according to the instructions of the antifreeze brand and according to local
climatic conditions.
Replace the solution in the cooling circuit.
If the solution is lost due to evaporation or overflow, top up in the original mixing ratio.
If engine coolant gets on your skin, it may cause skin irritation. Wash skin thoroughly with
soap and water or hand cleanser.

Check of Radiators for Clogging

After working in a dusty environment, check the radiator fins for clogging. If they are clogged, clean the
radiator fins with compressed air or water.
Important: Water or air under high pressure can distort the cooling fins on the radiator and
thus reduce the efficiency of the radiator.

Engine Oil and Filter Replacement

Always use the oil types and classes according to relevant specifications and observe the oil change
intervals. (see Tractor Maintenance chapter).
1 - Engine Oil Filter
2 - Engine Oil Dipstick
U18N059

Engine Oil Check

Remove the dipstick, wipe it and immerse in the oil pan.
Make sure the oil level is between the upper and lower
mark, near the upper mark. If the oil level is not as
specified, top up with the specified oil.
1. Minimum Level
2. Maximum Level
HODP096
86