Transmission Oil And Filter Check And Replacement; Transmission Oil Check; Transmission Oil Change; Oil Specifications - Zetor COMPAX CL Series Operator's Manual

Transmission Oil and Filter Check and Replacement

Transmission Oil Check

Check the transmission oil level with an oil dipstick to see if it is between the upper and lower mark.
If the oil level is not as specified, top up with the specified oil.

Transmission Oil Change

Remove the drain plug from the bottom of the
transmission and drain the oil.
After draining the oil, screw the drain plug back on.
Pour the prescribed transmission oil to the required level
through the filling port.
1. Drain Plug
When changing the oil, always replace the filter as well.
Always use the prescribed oil, as using different types of oils or oils with different specifications can
cause damage.
Only add the prescribed amount of oil.
At the end of its service life, dispose of the oil in accordance with applicable regulations.

Oil Specifications

API GL-4, below -20 ° C ISO VG 32, above -20 ° C ISO VG 46

Transmission Filter Maintenance

Unscrew the screw attaching the filter housing on the lower rear right part on the gearbox and gently remove
the filter with pliers.
When changing the transmission oil, clean the filter with diesel.
76
MAINTENANCE
CCL3540043
CCL3540045
CCL3540044