Turning In The Field; Stopping And Parking; Drive Off On Steep Slope - Zetor UTILIX CL Operator's Manual

Turning in the Field

Disconnect the latch connecting left and right brake pedals
to allow the use of individual pedals.
To make a tight turn use both the steering wheel and the
brake pedal at the same time.
For a left turns use the left pedal and a right turn the right
pedal.
Only use the brake pedals for turning at low speeds on unpaved surfaces.
At high speeds, the machine can roll over and cause very serious injury or death.
Note that when an implement is installed on the tractor, its overall length will increase. Pay extra
attention when turning.

Stopping and Parking

Let the engine come back to idle and at the same time
push in the clutch and brake simultaneously.
When the tractor has come to a halt, lower any implement
to the ground, and put the main gear in neutral.
Apply the park brake, stop the engine, and remove the
key.
Always use the parking brake when parking.
When parking on a slope, secure the rear wheels with wedges.

Drive Off on Steep Slope

With the pedals connected, depress the brakes and
depress the clutch.
Set all gear shift levers to low gears and throttle to
medium engine speed.
Release the clutch and release the brake pedals when
engaged.
Set the throttle to the required engine speed.
DRIVING OPERATION
U18N050
UCL18N042
HODP085
75