Using The New Pager Function; Setting The Transceiver Pager Code - Yaesu FTM-100DR Operating Manual

Communicating with specific stations

Using the new pager function

Use the pager code consisting of 2 CTCSS tones to exchange communications with
specified stations.
Caution
The new pager does not function in digital mode. To transmit signals utilizing the pager codes, use
the key to switch the communication mode to AMS (Auto Mode Select function) or analog (FM)
mode.

Setting the transceiver pager code

1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [6 PAGER CODE], then
press .
The pager setting screen appears.
4
Rotate the DIAL to select [RX CODE 1], then press
.
The code blinks.
5
Rotate the DIAL to select the desired code, and then press
Select the first part of the code from 01 to 50.
Tip The default setting: 05
6
Rotate the DIAL to select [RX CODE 2], then press
.
The code blinks.
7
Rotate the DIAL to select the code, and then press
Select the second part of the code from 01 to 50.
Tip The default setting: 47
86
for over one second.
.
.