Transmitting Tone Signals - Yaesu FTM-100DR Operating Manual

Transmitting tone signals

1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [4 SQL TYPE], then press
.
4
Rotate the DIAL to select [TONE ENC], then press
for over one second.
Tips • Rotating the DIAL changes the squelch type in the
following order:
"OFF", "TONE ENC", "TONE SQL", "REV TONE",
"DCS", "PR FREQ", "PAGER", "DCS ENC"*, "TONE
DCS"*, "DCS TSQL"*
* The squelch types may also be selected from the
Setup menu, select [4 SIGNALING] → [9 SQL
EXPANSION] followed by "1 ON".
• Instead of following the steps 1 to 4 above, the squelch
type may be selected by pressing and holding
for over one second.
Displays on the screen.
5
Press [PTT] on the microphone.
While pressing and holding [PTT], the signal containing the designated tone is
transmitted.
for over one second.
Communicating with specific stations
83