Sounding A Beep When A Partner Station Ends A Transmission (8 Standby Beep) - Yaesu FTM-100DR Operating Manual

Sounding a beep when a partner station ends a transmission
(8 STANDBY BEEP)
In digital communication, the transceiver can inform you that the partner station
completes a transmission by emitting a beep.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [2 TX/RX], then press
.
3
Rotate the DIAL to select [8 STANDBY BEEP], then
press .
4
Rotate the DIAL to switch the setting between ON
and OFF.
1 ON: Emits a beep when the partner station
completes a transmission.
2 OFF: Does not emit a beep when the partner
station completes a transmission.
Tip The default setting: 1 ON
5
Press and hold
Returns the display to the previously viewed screen.
for over one second.
for over one second.
Setup menu operations: 2 TX/RX
129