Setting The Aprs And Data Communication Speed (2 Data Speed) - Yaesu FTM-100DR Operating Manual

FREQUENCY: Outputs only the beacons of stations with frequency information.
OBJECT/ITEM: Outputs only the beacons of object stations or item stations.
DIGIPEATER: Outputs only the beacons of digital repeater stations.
VoIP: Outputs only beacons of VoIP stations such as WIRES.
WEATHER: Outputs only beacons of the weather station.
YAESU: Outputs only beacons of stations which are using Yaesu transceivers.
CALL RINGER: Outputs only the information of call sign ringer stations which are set
from [9 APRS RINGER (CALL)] in the APRS Setup menu.
RNG RINGER: Outputs only the information of stations recognized as an
approaching station by the [8 APRS RINGER] range ringer function
in the APRS Setup menu.
Tip The default setting: ALL
14
Press and hold
Sets the COM port and returns the display to the previous operating screen.

Setting the APRS and data communication speed (2 DATA SPEED)

Set the communication speed of the APRS (internal modem) and data communications
(when using the DATA jack on the rear panel of the transceiver).
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [9 DATA], then press
3
Rotate the DIAL to select [2 DATA SPEED], then
press .
The detail settings screen appears.
4
Rotate the DIAL to select [APRS], then press
5
Rotating the DIAL changes the speed between "1200 bps" and "9600 bps".
1200 bps: Sets the speed to AFSK1200bps packet.
9600 bps: Sets the speed to GMSK9600bps packet.
Tip The default setting: 1200 bps
6
Press .
7
Rotate the DIAL to select [DATA], then press
Repeat step 5 to set the data communication speed.
Tip The default setting: 1200 bps
8
Press and hold
for over one second.
for over one second.
for over one second.
Setup menu operations: 9 DATA
.
.
.
145