Using The Digital Code Squelch Function; Selecting The Dcs Code - Yaesu FTM-100DR Operating Manual

Communicating with specific stations

Using the digital code squelch function

This radio is equipped with a DCS (Digital Coded Squelch) function that allows audio to
be heard only when signals containing the corresponding DCS code are received. By
matching the DCS code with the partner stations beforehand, a quiet receive standby is
possible.
Caution
DCS does not function in digital mode. To transmit a signal with a DCS code, use the
switch the communication mode to AMS (Auto Mode Select function) or analog mode (FM).

Selecting the DCS code

The DCS code can be selected from 104 digital codes between 023 and 754.
1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [2 DCS CODE], then press
.
4
Rotate the DIAL to select the desired DCS code.
Tip The default setting: 023
5
Press and hold
Sets the DCS code and returns the display to the previously viewed screen.
Tip You can also return to the previous screen by pressing
84
for over one second.
for over one second.
key to
3 times.