Screen Display - Yaesu FTM-100DR Operating Manual

Screen display
①
②
➀
Icon display
Displays the Bluetooth, APRS, micro-SD memory card and GPS icons when each
function is in use.
➁
Station location information display
Displays the received station's location information and your station location
information. Briefly pressing the
between the received station location, and your station location.
➂
Sub-band frequency display
While in VFO mode, displays the sub-band name (A or B) and sub-band frequency.
While in memory mode, displays the registered frequency or memory tag.
➃
S-meter display
Displays the S-meter bar graph. Displays the squelch level while adjusting the
squelch.
Functions as a power indicator during transmission.
➄
Communication mode display
Displays the current operating mode, such as analog and digital using abbreviations.
Auto mode is indicated with a flashing bar appearing above the abbreviation. In
Auto mode, the communication mode is automatically set according to the receiving
signal.
Tip The AMS functions can be changed in the Setup menu from [2 TX/RX] → [3 AMS TX MODE].
➅
Indicates the operating band name, memory channel, and transmission.
When in VFO mode, the operating band name (A or B) is displayed.
While in memory mode, displays
A-band, and
When transmit is keyed,
indicates the "MID" level transmit power.
➆
Frequency display
Displays the operating band frequency.
⑥
and the memory channel number for the B-band.
indicates the "LO" level transmit power, and
Name and function of each component
③
⑦
key each time switches the displayed data
and the memory channel number for the
④
⑤
19