Calling Only A Specific Station; New Pager Function; Flow Of Operation To Use The Pager Function; Setting The Code For Your Station - Yaesu FT2DR Operating Instructions Manual

Calling Only a Specific Station

When using the transceivers with your friends, specifying personal codes (each code
composed of two CTCSS tones) allows you to call just a specific station. Even when
the person who is called is not near his or her transceiver, the information on the LCD
indicates that a call was received.
Caution
The new pager function does not function in digital mode. Touch [MODE] to switch the communication
mode to AMS (Automatic Mode Select Function) or analog mode in advance.
A
B
Three individuals A, B, and C,
each using a transceiver.

Flow of Operation to Use the Pager Function

Confirm reception via the information on the LCD and the bell sound.

Setting the Code for Your Station

Set the personal code (your code) to be called by other stations.
1
Press and hold the
The transceiver enters Set mode.
2
Touch [SIGNALING].
116
C
Mr. C sends the personal
code of Mr. B.
Set the same code as that of the remote station.
Determine a frequency.
Transmit/receive.
key for over one second.

New Pager Function

I'm gonna
call Mr. B
Ring!
Ring,
Ring,
Only Mr. B is called.