Squelch Detection And Squelch Jack Output Settings (3 Data Squelch); Setup Menu Operations: 10 Aprs; Setup Menu Operations: 11 Sd; Copying The Transceiver Settings To A Micro-Sd Memory Card (1 Backup) - Yaesu FTM-100DR Operating Manual

Setup menu operations: 9 DATA
Sets the communication speed of APRS and data communication and returns the
display to the previously viewed screen.
Squelch detection and squelch jack output settings
(3 DATA SQUELCH)
Set the squelch detection condition for APRS (internal modem) operations and squelch
jack output condition for data communications (when using the DATA jack on the rear
panel of the transceiver). See "Setting the packet communication operation" on page
112.

Setup menu operations: 10 APRS

The transceiver is equipped with the APRS function which enables receiving and
transmitting GPS location data, information and messages in the APRS format.
For details, refer to the APRS Instruction Manual (download from Yaesu website).

Setup menu operations: 11 SD

Copying the transceiver settings to a micro-SD memory card
(1 BACKUP)
Using a micro-SD memory card, the information registered to the memory channels,
and the Setup menu settings may be recorded and transferred to other FTM-100DR/DE
transceivers.
The settings saved on a micro-SD memory card may be imported to your transceiver.
For details, see "Copying the radio data to another transceiver" on page 104.

Initializing a micro-SD memory card (2 FORMAT)

When using a new micro-SD memory card, initialize the memory card.
For details, see "Initializing micro-SD memory cards" on page 33.
146