Selecting The Receiver Operation Performed After Scanning Stops (3 Scan Resume); Setting The Channel Signal Reception Time When Using The Dual Reception Function (4 Dual Watch Mode); Setup Menu Operations: 6 Gm; Setup Menu Operations: 7 Wires-X - Yaesu FTM-100DR Operating Manual

Setup menu operations: 5 SCAN
Selecting the receiver operation performed after scanning stops
(3 SCAN RESUME)
You can select the receiver operation to be performed after the scanning stops. For
details, see "Selecting the receiver operation performed after scanning stops" on page
63.
Setting the channel signal reception time when using the dual
reception function (4 DUAL WATCH MODE)
Set the time to check the HOME channel when using the dual reception function. For
details, see "Setting the channel signal reception time when using the dual reception
function" on page 71.

Setup menu operations: 6 GM

The GM (group monitor) function enables the transceiver to automatically check whether
the members on the same frequency are within communication range.
For details, refer to the separate GM Function Instruction Manual (download from Yaesu
website).

Setup menu operations: 7 WIRES-X

The WIRES-X is a communication system to broaden the amateur radio communication
linking worldwide using the Internet.
For details, refer to the separate WIRES-X Instruction Manual (download from Yaesu
website).
134