Calling A Specific Station - Yaesu FTM-100DR Operating Manual

Communicating with specific stations

Calling a specific station

1
Press and hold
The Setup menu appears.
2
Rotate the DIAL to select [4 SIGNALING], then press
.
The menu list appears.
3
Rotate the DIAL to select [6 PAGER CODE], then
press .
The code setting screen appears.
4
Rotate the DIAL to select [TX CODE 1], then press
.
The code blinks.
5
Rotate the DIAL to select the desired code, then
press .
Select the first part of the code from 01 to 50.
Tip The default setting: 05
6
Rotate the DIAL to select [TX CODE 2], then press
.
The code blinks.
7
Rotate the DIAL to select the code, then press
Select the second part of the code from 01 to 50.
Tip The default setting: 47
8
Press and hold
Sets the partner station code and returns the display to the previously viewed
screen.
Tip You can also return to the previous screen by pressing
9
See "Activating the new pager function" on page 87 to activate the PAGER
function.
10
Press [PTT] on the microphone.
Calls the partner station.
88
for over one second.
for over one second.
.
3 times.