Table of Contents
Advertisement
Relay Group Setup Summary (Cont'd)
8.TX REPORT
9.TX START TIME
10.RELAY B'CAST
Changing the Relay Broadcast Settings
Follow this procedure to change the relay broadcast settings.
❏
If you want to add to the list of fax units to receive relay broadcasts
from your fax unit, make sure that the numbers you want to add are
registered for One-touch or Coded Speed Dialing.
❏
If you want to set your fax unit to confirm the identity of the origina-
tor before it receives a document for relay broadcasting, make sure
the telephone number of the originator's fax unit is registered for
One-touch or Coded Speed Dialing on your fax unit.
Chapter 9
This feature determines if your fax unit returns a relay transmis-
sion report to the originator after your fax unit receives and relays
a document.
TRANSMIT
After your fax unit relays a document, it sends
a transmission report back to the originator. In
order for the feature to perform correctly, the
originator's unit telephone number must be
registered on your fax for One-touch or Coded
Speed Dialing.
NOT
No relay transmission report is sent to the
TRANSMIT
originator after a document has been relayed.
You can set your fax to hold documents and then relay them at a
preset time. If you do not set this item, all documents received for
relay are relayed immediately. If you want to use this feature,
press
.
Set
Use the buttons on the numeric keypad to enter the time in 24-
hour format. You can set up to 5 times to relay documents within a
24-hour period every day.
This feature switches relay broadcasting for this group on and off
without altering any of the other settings.
ON
Your fax unit receives and relays a document
set for relay broadcasting.
OFF
Your fax unit will not receive and relay a
document set for relay broadcasting.
Using a Relay Network 9-7
Advertisement
Table of Contents
