Table of Contents
Advertisement
*Default settings are in bold.
1.CONFID. MAILBOX
1.SETUP FILE
SET BOX #
1.FILE NAME
2.PASSWORD
3.SUBADDRESS
4.RX PASSWORD
5.# OF RX COPIES
2.CHANGE DATA
SET BOX #
PASSWORD
3.DELETE FILE
SET BOX #
PASSWORD
2.RELAY TX GROUP
1.SETUP FILE
SET RLY TX GROUP# Set a two-digit relay group number (00-99).
1.GROUP DIAL NAME
2.PASSWORD
3.SUBADDRESS
4.RX PASSWORD
5.SELECT ORIG UNIT
ON
TEL=
OFF
6.PRINT RX DOC.
ON
# OF RX COPIES Set the number of document copies to print.
OFF
7.SELECT LOCATIONS
TEL=
Chapter 16
Set up confidential mailbox. (➞10-2)
Set up a confidential mailbox.
Create a two-digit confidential mailbox number.
Give the mailbox a name up to 24 characters long.
Assign a password to protect the mailbox from being changed or deleted.
Enter a 20-digit (max.) ITU-T subaddress for reception.
Enter a 20-digit (max.) ITU-T password for reception.
Sets the number of copies printed from every document.
Change all the mailbox settings done with the settings
above.
Enter the number of the mailbox you want to change.
Enter the password protecting the mailbox settings.
You can now change any of the settings listed in the table
above (1.SETUP FILE).
Delete a mailbox.
Enter the number of the mailbox you want to delete.
Enter the password protecting the mailbox you want to
delete.
Set up relay box so your fax machine can relay document
transmissions to other fax machines in your area. (➞9-3)
Set up the relay box.
Give the relay group a name (length: 24 characters).
Assign a four-digit password to protect the relay box settings.
Enter a 20-digit (max.) ITU-T subaddress.
Enter a 20-digit (max.) ITU-T password.
Set your fax to check the incoming relay command to make sure the
originator is registered.
Receives and obeys incoming relay commands for registered
originators only. Use the One-touch or Coded Speed Dialing buttons to
register originators.
Receives and obeys all incoming relay commands.
Turns printing on/off for documents received for relay.
Prints a copy of every document relayed.
No copy is printed.
Use the One-touch or Coded Speed Dialing buttons to select the fax
numbers to receive the document relayed from your fax machine.
Summary of Important Settings
16-21
Advertisement
Table of Contents
