Table of Contents
Advertisement
8.TX REPORT
TRANSMIT
NOT TRANSMIT
9.TX START TIME
10.RELAY B'CAST
OFF
ON
2.CHANGE DATA
SET RLY GROUP TX# Enter the number of the relay box you want to change.
PASSWORD
3.DELETE FILE
SET RLY TX GROUP# Enter the number of the relay box you want to delete.
PASSWORD
3.MEMORY BOX
1.SETUP FILE
SET BOX #
1.FILE NAME
2.PASSWORD
3.SUBADDRESS
4.TX PASSWORD
5.RX PASSWORD
16-22
Summary of Important Settings
Send a TX report from your fax machine (the relay unit) to the
originator of the transmission.
Transmits a document relay report to the originator.
No report is transmitted.
Set the fax machine to hold the document from the originator and then
relay it at a specified time. Use 24-hour setting. Up to 5 time settings are
possible.
Turn relay broadcasting off temporarily without canceling or changing
all of the relay box settings.
In order for relay broadcasting to occur, this setting must be on.
Change or add the settings on the relay box.
Enter the password protecting the relay box settings.
You can now change any of the settings listed in the table
above (1.SETUP FILE).
Delete a relay box and all settings.
Enter the password of the relay box you want to delete.
Set up a general memory box to handle ITU-T subaddress
and password transactions. (➞8-11)
Create a general memory box and do all the general
memory box settings.
Give the general memory box a box number.
Give the memory box a name up to 24 characters long.
Assign a four-digit password to protect the memory box
settings.
Enter a 20-digit (max.) ITU-T standard subaddress. You
must enter a subaddress in order to use the memory box features.
Enter a 20-digit (max.) ITU-T password.
Enter a 20-digit (max.) ITU-T password.
Chapter 16
Advertisement
Table of Contents
