Using the Optional Dual-Line
The optional Dual-line Upgrade Kit, allows you to connect one more
telephone line to the fax unit at the same time. This section describes
how to connect the telephone lines to the Dual-line Upgrade Kit and set
up the fax unit.
Connecting Two Telephone Lines
The Dual-line Upgrade Kit must be installed inside the fax unit by a
qualified service technician. For details, contact a local authorized Canon
dealer.
Note the following features regarding the installation of the Dual-line
Upgrade Kit:
❏
When either the Dual-line Upgrade Kit or the PCL6 Printer Board is
installed in the fax unit, the energy saver feature cannot be used.
(➞3-21)
❏
With the Dual-line Upgrade Kit installed, if you have installed the
optional handset you will not be able to use it for voice telephone
communication on Line 2.
1. Make sure you have two RJ11-C wall jacks. If you need assistance,
2. Locate the telephone line jacks on the right side (
2-54
Setting Up
contact your dealer or telephone company.
side (
) of the fax unit. The jack marked
jack marked
is for Line 2.
) and the back
is for Line 1 and the
Chapter 2