Table of Contents
Advertisement
Receiving Documents Manually with the
Optional Handset
When you use manual receiving, this means you can monitor all incom-
ing calls yourself by picking up the handset every time the fax rings. If
you pick up the handset and determine the call is from another person,
start your conversation. If you hear a slow beep tone, this means the call
is a fax transmission. To receive the document, just press
then hang up the handset.
The receiving speed is 14400 bps or less when receiving manually.
Receiving a Document Manually at the Fax
Follow this procedure to receive a document manually at the fax.
•Before you can use this feature, you must install the optional handset
kit or a regular telephone. (➞2-38) Make sure the document is not set
on the ADF.
•If you have installed the optional Dual-line Upgrade Kit, when the fax
unit receives a document on Line 2 it will switch to automatic receiving
regardless of whether the Manual RX lamp is on or off. (➞2-56)
1.
Press
Manual RX
Manual RX indicator should be on.
2. Every time you hear the telephone ring, pick up the handset.
If you hear someone on the line, you can talk.
-if not-
If you hear a slow-beep tone, this means another fax is trying to
send you a document.
Chapter 7
to set the fax in the manual receive mode. The
Manual RX
and
Start/Scan
Receiving Documents
7-7
Advertisement
Table of Contents
