Press the search buttons to display the speed you want to select.
Then press
Set
10. Turn ECM off or on.
Set
Press
Press the search buttons to display OFF or ON.
ECM (error correction mode) reduces the effect of system and line errors
on documents that occur during sending or receiving with another fax
that supports ECM. Otherwise, this setting is ignored. If transmission
speed appears to be extremely slow, you may be able to speed up
transmission time by turning ECM off.
Set
Press
This completes all settings for telephone registration of Coded
Speed Dialing codes.
If you want to set up other codes, repeat from step 2.
-if not-
Stop
Press
Chapter 4
.
Set
OPTIONAL SETTING
5.ECM
.
Set
ECM
.
Set
CODED SPD DIAL
013 =
*
to return to standby.
Stop
Setting Up and Using Speed Dialing
ON
4-23