Table of Contents
Advertisement
6. To avoid pinching your fingers between the toner cartridge and
fax unit, grip the cartridge as shown below.
7. Load the cartridge in the direction indicated by the arrow. Gently
slide the cartridge into the printer area until it is down inside the
fax unit and level.
8. Shut the printer cover.
❏
Chapter 2
KEEP THE DRUM SLOT FREE
OF DUST AND OTHER
FOREIGN OBJECTS.
DO NOT TOUCH THE
PROTECTIVE SHUTTER ON
THE BOTTOM OF CARTRIDGE.
The fax unit will not operate if the printer cover is not closed
completely.
CHECK PRINTER COVER
If you see the message above and the Error lamp blinks red
when the fax unit is plugged in (➞2-41), open the cover again
and make sure the toner cartridge is level. Then shut the
printer cover again.
2-25
Setting Up
Advertisement
Table of Contents
