Set
Press
6.
box.
When another party polls your fax to receive a document stored in
your polling box, the document is sent if the following conditions
are met:
❏
❏
❏
Changing the Polling Box Setup
Follow this procedure to change the setup of the polling box.
1. Open the POLLING BOX menu. (➞11-15, 11-16)
2. Press the search buttons until you see the display below.
Chapter 11
. The fax starts scanning the document into the polling
Set
POLLING TX
SCANNING DOC.
If you entered both a subaddress and a password when you
created the polling box, the subaddress and the password of
the other party's polling request must match the subaddress
and the password for the polling box.
The password setting is optional. However, if you have
registered a password for the polling box, the other party's
polling request must contain a matching password.
If no password is registered for the document in the polling
box and the other party's polling request contains a password,
then the document is not sent.
POLLING BOX
1.SETUP FILE
POLLING BOX
2.CHANGE DATA
6048
P.003
Setting Up and Using Polling
11-21