Table of Contents
Advertisement
Numeric buttons
The numeric buttons are the round buttons on the operation panel
marked the same as a standard telephone keypad. Press to perform
regular dialing. The numeric buttons are also used to enter numbers and
letters when registering numbers and names.
O
One-touch Speed Dialing
Each One-touch Speed Dialing button holds a facsimile telephone
number. After the numbers are registered, all you have to do is press one
button to dial. Up to 72 numbers can be registered for One-touch Speed
Dialing.
P
Pause
By pressing
, you can enter a pause between digits of a telephone
Pause
number when you register the number for One-touch or Coded Speed
Dialing or during regular dialing. A pause may be required for a connec-
tion to an outside line, or some countries may require a pause for over-
seas fax transmission.
Pause time
When registering long-distance numbers, you sometimes have to insert a
pause either within or after the number. The destination of the pause and
pause time depend on the system. Pauses entered within a number are 2
seconds long, and a pause at the end of a number is 10 seconds. A pause is
inserted in a number or at the end of a number by pressing the
Pause
button. The
button is factory preset to enter a 2 second pause within
Pause
a number, although this may differ according to your location. Pauses
entered after a number are always fixed at 10 seconds. If you adjust the
pause time, this only changes the length of the pauses inserted within
numbers and does not affect pauses entered at the end of numbers.
PBX
Stands for private branch exchange. A PBX controls the flow of telephone
traffic through the institution itself, including automatic call back and
dialing and paging systems. See switchboard.
G-9
Glossary
Advertisement
Table of Contents
