Table of Contents
Advertisement
Set
Press
2.
you can see each setting.
Set
Press
3.
the settings.
Stop
Press
4.
Transfer Setup Summary
The default settings, shown in bold below, remain in effect unless
you change them.
1.FILE NAME
2.SELECT LOCATIONS Select the numbers of the fax machines where you want
3.PASSWORD
Chapter 7
. Then press the search buttons to scroll the display so
Set
SETUP FILE
1.FILE NAME
SETUP FILE
6.PRINT RX DOC.
then follow the summary in the table below to perform
Set
to return to standby.
Stop
Enter a file name up to 24 characters long.
documents transferred.
TEL =
Close the One-touch Speed Dialing panels
and press a One-touch Speed Dialing button
or press the
three-digit code for the Coded Speed Dialing
number to enter the number of the fax
machine where you want documents trans-
ferred. The telephone number of the destination
fax must be registered for One-touch or Coded
Speed Dialing on your fax.
0000-9999
Enter a four-digit number (0000-9999) to protect the transfer
file settings. Use of a password is recommended. This operation
password protects the transfer file from unauthorized access
to your settings. You will also need to enter this password
when you put the fax in the document transfer mode.
button followed by a
Coded Dial
Receiving Documents
7-15
Advertisement
Table of Contents
