Scanning A Document Into The Polling Box; Changing Or Deleting The Polling Box Settings - Canon FAX-L220 User Manual

Scanning a Document into the Polling Box

Follow this procedure to store a document in the polling box so that other fax
machines can retrieve it:
You need to set up the polling box before you can scan a document into the polling box
( p. 9 11).
1
Load the document, face down in the ADF
(
•
•
2
Press Function.
3
Press Polling.
4
Press OK.
•
When another fax machine polls your FAX, the following conditions apply:
• If you registered a password for the polling box, the other party's fax machine
must request the document with this exact same password.
• If you have not registered a password for the polling box, but the other fax
machine requests the document from your FAX with a password, the document
cannot be retrieved.

Changing or Deleting the Polling Box Settings

Follow this procedure to change or delete the polling box settings:
You will be unable to delete the polling box settings if you have scanned a document into
the polling box (see above). Delete the document from memory first before following the
procedure below (
1
Press Function.
9 14 Special Features
p. 4 3).
To adjust the resolution and contrast, see
pp. 7 2, 7 3.
You may be unable to scan if the memory
used (shown in the LCD) is close to
100%. To free up space in the FAX's
memory: print, send, or delete any
documents you no longer need to be
stored in memory (
The FAX scans the document into the
polling box.
p. 9 8).
p. 9 4).
Ex:
MEMORY USED 0%
(Currently used memory)
DOCUMENT READY
(Standby to scan)
POLLING TX
Chapter 9