3. Locate the stamp pad then apply only one drop of ink to the
TO AVOID INK SPILLAGE, APPLY ONLY ONE DROP OF INK TO
THE STAMP PAD.
4. Follow steps 10 to 12 on pages 15-32 and 15-33 to close the ADF
• Make sure that you do not drip ink on any other part of the fax.
• Make sure that you put the plastic loop back in place when you close
the ADF cover. (➞15-33)
15-34
Maintenance & Frequently Asked Questions
stamp ink compartment.
❏
To avoid a malfunction, do not add too much ink.
❏
Use only Shachihata X Stamper Ink CS-20 Yellow.
❏
Do not use the stamp feature for at least one hour. If you have
to send a document, turn off the stamp feature for the first
hour. (➞12-10)
cover, lower the document feeder tray, and connect the power cord
of the fax unit to the power source.
Chapter 15