Changing The Relay Broadcast Settings - Canon FAX-L800 User Manual

Relay Group Setup Summary (Cont'd)
9.TX START TIME
10.RELAY B'CAST

Changing the Relay Broadcast Settings

Follow this procedure to change the relay broadcast settings.
1. Open the RELAY TX GROUP menu. (Q9-3)
2. Press the search buttons until you see the display below.
SET
3. Press SET.
9-6 Using a Relay Network
You can set your fax to hold documents and then relay them at a
preset time. If you do not set this item, all documents received for
relay are relayed immediately. If you want to use this feature, press
SET.
Use the buttons on the numeric keypad to enter the time in 24-hour
format. You can set up to 5 times to relay documents within a 24-hour
period every day.
This feature switches relay broadcasting for this group on and off
without altering any of the other settings.
ON
OFF
If you want to add to the list of fax units to receive relay broadcasts from
your fax unit, make sure that the numbers you want to add are registered for
One-touch or Coded Speed Dialling.
If you want to set your fax unit to confirm the identity of the originator
before it receives a document for relay broadcasting, make sure the telephone
number of the originator's fax unit is registered for One-touch or Coded
Speed Dialling on your fax unit.
RELAY TX GROUP
1.SETUP FILE
RELAY TX GROUP
2.CHANGE DATA
CHANGE DATA
SET RLY TX GROUP# 00
Your fax unit receives and relay a document set
for relay broadcasting.
Your fax unit will not receive and relay a
document set for relay broadcasting
Chapter 9