Read This Before Entering Telephone Numbers; Entering Pauses For Dialing - Canon 3170 Series User Manual

Read This before Entering Telephone Numbers

Read this section before you register numbers for speed dialing, espe-
cially if your site has special dialing requirements like dialing through a
PBX.

Entering Pauses for Dialing

If your fax is connected to a switchboard or PBX (private branch ex-
change), you may have to dial a number to connect to an outside line. The
outside number must also be registered with the fax number. The switch-
ing system may also require that you insert a pause after the outside
number. For further assistance, contact your local authorized Canon dealer
sales or service representative or your local telephone company.
Follow this procedure to enter a pause during regular dialing or when
registering a number for a speed dialing button.
1. When you come to a step that asks you to enter a number for
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
9
7 8
OPER SYMBOLS
0
Tone
Pause
2. To enter a pause between two numbers, press
P
Pause
Set
3. To enter a pause at the end of a number, press
P
4-2
Setting Up and Using Speed Dialing
dialing, use the buttons on the numeric keypad to enter the
number.
TELEPHONE NUMBER
TEL = 03_
enter the next number, the "P" changes to a small "p".
TELEPHONE NUMBER
TEL = 03P_
. The pause at the end of a number appears as an upper case
Set
"P".
TELEPHONE NUMBER
TEL = 03p123 4567P
. After you
Pause
then press
Pause
Chapter 4