Selecting A Sender Name - Canon 3170 Series User Manual

Selecting a Sender Name

Follow this procedure to select one of the registered sender names.
❏
Sender names are selected by pressing the
❏
This setting is optional. If you do not select a sender name before
sending a document, the registered unit name will be printed at the
top of the document in the sender information area. (➞3-12)
❏
If you select a sender name before you send a document, it will
replace the unit name printed in the sender information area.
(➞3-12)
❏
Up to 19 sender names can be registered. At least one sender name
must be registered so you can use this feature. (➞3-18)
1. Set the document on the fax and adjust the document guides to
2. Dial the number.
ABC DEF
1 2 3
GHI JKL MNO
4 5 6
PRS TUV WXY
9
7 8
OPER SYMBOLS
0
Tone
3. Open all three of the One-touch Speed Dialing panels.
TTI Selector
6-6
Sending Documents
the width of the document. (➞6-3)
Press the buttons on the numeric keypad to dial the number.
-if not-
Press a One-touch Speed Dialing button to dial the number.
(➞4-29)
-if not-
Press and a three-digit code to dial the number. (➞4-31)
Coded Dial
-if not-
Use directory dialing. (➞4-35)
Press until the desired name appears in the display.
TTI Selector
-if not-
Press . Then press the search button until the desired
TTI Selector
name appears in the display.
button.
TTI Selector
Chapter 6