Specifying The Double-Sided Document Format; Changing The Default Settings - Canon FAXPHONE L190 Basic Operation Manual

52

Specifying the Double-Sided Document Format

You can set the document format to scan double-sided documents automatically.
1
Place your documents (
2
Switch to the Fax mode (
3
▲ ▼
Press [ ] or [ ] to highlight <2-Sided Original>, and then press [OK].
4
▲ ▼
Press [ ] or [ ] to highlight the desired option, and then press [OK].
<Off >
<Book Type>
<Calendar Type>
5
Send a fax to the desired destination (

Changing the Default Settings

You can change the default settings that is applied when the machine is restarted, [
(Reset) is pressed or the screen is returned to the default screen after auto screen is
performed.
1
Press [ ] (Menu).
2
▲ ▼
Press [ ] or [ ] to highlight <Fax TX Settings>, and then press [OK].
3 ▲ ▼
Press [ ] or [ ] to highlight <TX Function Settings>, and then press [OK].
4 ▲ ▼
Press [ ] or [ ] to highlight <Change Defaults>, and then press [OK].
5 ▲ ▼
Press [ ] or [ ] to highlight the desired option, and then press [OK].
6
Specify the desired setting.
7
After you have specifi ed the setting, press [
<Apply>, and then press [OK].
8
Press [ ] (Menu) to close the screen.
→
p.19).
→
p.16).
Read only one side of documents.
•
Read both sides of documents.
•
Select when the document is a
book type.
•
Read both sides of documents.
•
Select when the document is
calendar type.
→
p.53).
▲ ▼
] or [ ] to highlight
]